Edge-Core RG230 Guía de usuario descargar pdf (Pagina 82)

Wi-Fi Settings

8-2

Figure 8-1. Wireless Settings

Interface Status – Enables the Wi-Fi radio.

Network Name (SSID) – The Service Set ID (SSID) that identifies the Wi-Fi

network. The SSID is case sensitive and can consist of up to 32 alphanumeric

characters. (Default: default)

Radio Channel – The radio channel used by the unit and its clients to communicate

with each other. This channel must be the same on the unit and all of its wireless

clients. The available channel settings are limited by local regulations. (Default: 1;

Range: 1-11)

Note: If you experience poor performance, you may be encountering interference from

another wireless device. Try changing the channel, as this may eliminate

interference and increase performance. Channels 1, 6, and 11, as the three

non-overlapping channels in the 2.4 GHz band, are preferred.

Auto Channel Select – Enables the unit to automatically select an available radio

channel. (Default: Enabled)

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 115 116

Sin comentarios

Edge-Core RG230 Guía de usuario Pagina 82