Edge-Core ES4016 Guía de instalación descargar pdf (Pagina 28)

3-4

Installing the Switch

2. Mount the device in the rack, using four rack-mounting screws (not provided).

Figure 3-3. Installing the Switch in a Rack

3. If installing a single switch only, turn to “Connecting to a Power Source” at the

end of this chapter.

4. If installing multiple switches, mount them in the rack, one below the other, in

any order.

Desktop or Shelf Mounting

1. Attach the four adhesive feet to the bottom of the first switch.

Figure 3-4. Attaching the Adhesive Feet

2. Set the device on a flat surface near an AC power source, making sure there

are at least two inches of space on all sides for proper air flow.

3. If installing a single switch only, go to “Connecting to a Power Source” at the

end of this chapter.

4. If installing multiple switches, attach four adhesive feet to each one. Place each

device squarely on top of the one below, in any order.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

Sin comentarios

Edge-Core ES4016 Guía de instalación Pagina 28