Edge-Core ECS4610-24F Guía de instalación Pagina 42

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 41
C
HAPTER
3
| Installing the Switch
Ethernet Cabling
– 42 –
ETHERNET CABLING
To ensure proper operation when installing the switches into a network, make
sure that the current cables are suitable for 10BASE-T, 100BASE-TX or
1000BASE-T operation. Check the following criteria against the current
installation of your network:
Cable type: Unshielded twisted pair (UTP) or shielded twisted pair (STP)
cables with RJ-45 connectors; Category 3 or better for 10BASE-T, Category
5 or better for 100BASE-TX, and Category 5, 5e or 6 for 1000BASE-T.
Protection from radio frequency interference emissions
Electrical surge suppression
Separation of electrical wires (switch related or other) and electromagnetic
fields from data based network wiring
Safe connections with no damaged cables, connectors or shields
Figure 12: RJ-45 Connections
RJ-45 Connector
Vista de pagina 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 91 92

Comentarios a estos manuales

Sin comentarios