Edge-Core EWS4502 Guía de instalación descargar pdf (Pagina 43)

Chapter 6

| AP Management

How to Connect to the Console Port

– 43 –

Figure 27: Console Port Connection

Follow these steps to connect to the Console port:

1. Unscrew the waterproof protective cap on the AP’s Console port.

2. Attach the DB-9 end of the included serial cable to a DB-9 COM port connector

on a management PC. Use a USB to male DB-9 adapter cable (not included) if

needed.

3. Attach the RJ-45 end of the serial cable to the Console port on the AP.

4. Configure the PC’s COM port required settings using VT-100 terminal emulator

software (such as HyperTerminal) running on the management PC.

5. Log in to the command-line interface (CLI) using default settings:

■

User — admin

■

Password — null (there is no default password)

6. When you have completed your console session, remove the console cable and

replace the waterproof cap on the connector.

For a detailed description of connecting to the console and using the AP’s

command line interface (CLI), refer to the Management Guide.

RJ-45 Console Port Console Cable

Waterproof Port Cover

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50 51

Sin comentarios

Edge-Core EWS4502 Guía de instalación Pagina 43