Edge-Core ES4324 EU Guía de instalación descargar pdf (Pagina 31)

Mounting

3-3

Mounting

A switch unit can be mounted in a standard 19-inch equipment rack or on a desktop

or shelf. Mounting instructions for each type of site follow.

Rack Mounting

Before rack mounting the switch, pay particular attention to the following factors:

• Temperature: Since the temperature within a rack assembly may be higher than

the ambient room temperature, check that the rack-environment temperature is

within the specified operating temperature range (see page C-1).

• Mechanical Loading: Do not place any equipment on top of a rack-mounted unit.

• Circuit Overloading: Be sure that the supply circuit to the rack assembly is not

overloaded.

• Grounding: Rack-mounted equipment should be properly grounded. Particular

attention should be given to supply connections other than direct connections to

the mains.

To rack-mount devices:

1. Attach the brackets to the device using the screws provided in the Bracket

Mounting Kit.

Figure 3-2 Attaching the Brackets

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 59 60

Sin comentarios

Edge-Core ES4324 EU Guía de instalación Pagina 31