Edge-Core ECS3510-26T EUK Guía de instalación Pagina 46

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 45
C
HAPTER
3
| Installing the Switch
Connecting to the Console Port
– 46 –
CONNECTING TO THE CONSOLE PORT
This port is used to connect a console device to the access point through a serial
cable. The console device can be a PC or workstation running a VT-100 terminal
emulator, or a VT-100 terminal. A crossover RJ-45 to DB-9 cable is supplied with
the unit for connecting to the console port, as illustrated below. The PIN
assignments used to connect to the serial port are described below.
Figure 17: Console Cable
WIRING MAP FOR SERIAL CABLE
Table 4: Serial Cable Wiring
Switch’s 9-Pin
Serial Port
Null Modem PC’s 9-Pin
DTE Port
2 RXD (receive data) <--------------------- 3 TXD (transmit data)
3 TXD (transmit data) ---------------------> 2 RXD (receive data)
5 SGND (signal ground) ----------------------- 5 SGND (signal ground)
No other pins are used.
RJ-45 Connector
Console Port
DB-9 Port
Vista de pagina 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 79 80

Comentarios a estos manuales

Sin comentarios