Edge-Core WA6202AM EU Guía de usuario descargar pdf (Pagina 76)

System Configuration

6-22

• Bridge: Operates as a bridge to other access points. The “Parent” link to the root

bridge must be configured. Up to five other ”Child” links are available to other

bridges.

• Repeater: Operates as a wireless repeater, extending the range for remote

wireless clients and connecting them to the root bridge. The “Parent” link to the

root bridge must be configured. In this mode, traffic is not forwarded to the

Ethernet port from the radio interface.

• Root Bridge: Operates as the root bridge in the wireless bridge network. Up to

six ”Child” links are available to other bridges in the network.

• Master/Slave Mode – Selects between Master and Slave mode. A single master

enables up to five slave links, whereas a slave will have only one link to the master.

• Bridge Parent – The physical layer address of the root bridge unit or the bridge unit

connected to the root bridge. (12 hexadecimal digits in the form

“xx-xx-xx-xx-xx-xx”)

• Channel Auto Sync – Allows a Bridge Child to automatically find the operating

channel used by its Bridge Parent.

Caution:Do not enable Channel Auto Sync on a master bridge if there is no root bridge

acting as the master bridge's parent.

• Bridge Child – The physical layer address of other bridge units for which this unit

serves as the bridge parent or the root bridge. Note that the first entry under the list

of child nodes is reserved for the root bridge, and can only be configured if the role

is set to “Root Bridge.” (12 hexadecimal digits in the form “xx-xx-xx-xx-xx-xx”)

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 331 332

Sin comentarios

Edge-Core WA6202AM EU Guía de usuario Pagina 76